Skip to main content

ARUBA MULTIZONE

 ARUBA MULTIZONE


Aruba Mutizone is the feature that we can use to isolate Guest user traffic from Corporate Network, But this Feature is not only for Guest Network. To use Multizone Feature in Aruba Controller you need Mobility Master based solution. 


Key Points in Multizone

  • Multizone gives you separate Management and data Traffic Zones 
  • Primary Zone is the AP connecting Zone when the AP Initial Boot up and also PZ have the Full Control of the AP ( WLAN,RF, etc)
  • MultiZone AP can belong to only one PZ and it can support up to 4 DZ 
  • Maximum 12 Controller for all Zones
  • Maximum 16 VAP per radio for all Zones 
  • Multizone required RFP license 
  • DZ AP Group should be same as PZ ap group

Multizone AP Function Flow




  •  CPSec is Highly recommend to enable previous version of  Aruba Controllers does not support Auto-cert provision Feature but now a days Aruba firmware support this so you do not need to manually provision the AP

  • Data Zone does not Required any License for Multizone APs Bit if you what to enable Firewall Features and RF features then you need license as per the AP count 

Labels:

Comments

Post a Comment

Popular posts from this blog

Check Aruba ClearPass Serial Number

  CHECK ARUBA CLEARPASS SERIAL NUMBER Today we are Going to learn how to check the serial number of a Aruba Clearpass this is useful because you need this to submit license and also if you raise a support ticket they ask the serial number of your CPPM. below i mention the steps  1. log into your ClearPass appliance using WebUI 2. In the Dashboard click on OS version of Clearpass 3. in the Dialog box you can find the serial number  Thanks!!!! Lets meet with another blog        
Post a Comment
Read more

Initial setup of Aruba Controller

Setup Aruba Controller In First Time Hi Friends thanks for being with me in this post i describe you to setup aruba controller in first time and also i provide a link of video describe those steps.  ·          In this line It ask from you which method you need to install, md means install using Mobility master method and also other method is Standalone type. In here we are looking how to setup as a standalone type. ·          In 2 nd box you can insert the details according to your network setup ·          In 3 rd box you can verify the details you enter and also 4 th box ask to save the details After the reboot please enter the Username and Password you enter in the initial setup You can manage your Controller using GUI or CLI to manage through using GUI enter the management VLAN IP in your browser address bar. and also use the logging credentials you enter earlier.  You can also refer this link  https://youtu.be/Yfp9rgBagYY  
Post a Comment
Read more